EYE BOLT – BS529 WITH WHITWORTH SIZING
EYE BOLT – BS529 WITH WHITWORTH SIZING
BS529 Eye Bolts are generally used as a removable lifting point where a rated female thread or nut can be utilized, also can be used as a termination for Chain, Wire Rope and other assembles where required.
- SPECIFICATIONS
- DIMENSIONS
- Description
- RESOURCES
Filters Sort results
Reset Apply
DESCRIPTION | PRODUCT | MODEL | SPAN | CAPACITY | RATED CAPACITY | CHAIN LENGTH | SIZE | SIZE 1 LEG | SIZE 2 LEG | SIZE A | SINGLE LEG | SIZE G80 | SIZE G100 | CHAIN SIZE | DIAMETER | CHAIN SIZE 1 LEG | CHAIN SIZE 2 LEG | ROUND SLING | FLAT SLING | WLL | LENGTH | LENGTH WHEN CLOSED | WLL (per 1t) | WLL (per 4t) | WLL 0° | WLL 30 ° OR LESS | WLL 30° OR LESS SUPERFLEX CABLE SIZE | WLL 4:1 | WLL 45° | WLL 60° | WLL 90° | WLL F1 | WLL F2 | WLL Inclination angle of legs 0 - 45° | WLL Inclination angle of legs 0° (± 7°) parallel | WLL SF 7:1 | B.L | TYPE | WEIGHT | WEIGHT ADD LINEAR METRES | WEIGHT AT STANDARD LIFT 1.5M | WEIGHT ELECTRIC TROLLEY | WEIGHT PUSH TROLLEY | COLOUR | WEIGHT STD HOL | WEIGHT SUSPENSION LUG | WIDTH | HEIGHT | QTY | IAK / IA-LINK | TOP CONNECTION | BOTTOM CONNECTION | LI | MASTER LINK | JOINING LINK | INSIDE WIDTH | INSIDE WIDTH (FLAT) | WEBBING WIDTH | NO OF WEBBING LAYERS | SLEEVE WIDTH | SLEEVE WIDTH OF ULLD ROUND SLING | SLEEVE WIDTH WITH EXTRA UPHD PROTECTION SLEEVE | THICKNESS | MIN SLING LENGTH | MIN PIN DIA | MIN LOAD EDGE DIA | DIMENSIONS | SWL | MESH PITCH | WEB SIZE | DIA OF LOAD CHAIN | DIAMETER X LENGTH | DIM (L X W X H) | MIN BREAKING | LASHING CAPACITY | SLING WIDTH OVER SINGLE LEG | SLING WIDTH OVER BOTH LEGS | WIDTH OF FASTENING | WIDTH OF SLEEVE USED | MAX Ø | M/100KG | KG/100m | ROPE DIA | ROPE EDGING | ROPE LENGTH | ROPE LENGTH / TOTAL RESCUE DISTANCE | ROPE TRAVEL DISTANCE | BREAK FORCE | BREAKING LOAD | PACK QTY | PACK SIZE | BEAM SIZE | MIN RADIUS OF CURVE | PULLING FORCE* (FULL LOAD) | I BEAM WIDTH RANGE | RATED LIFTING STRENGTH | VERTICAL / CYLINDRICAL LIFTING STRENGTH | MAX PULL OFF STRENGTH | OPERATING TEMP | MATERIAL | DRUM SIZE | JAW OPENING | SHEAVE DIA | FIBRE ROPE | WIRE ROPE | TRACK WIDTH | ROLLER DIA | ROLLERS PER UNIT | ROLLERS IN CONTACT | HEIGHT INCL TURNTABLE | TURNTABLE TOP DIA | STANDARD LIFT | LOAD CHAIN NO OF FALLS | LOAD CHAIN SIZE | FORCE | HOL | LIFT | HEADROOM C | MASS | OVERLOAD PROTECTION | HAND EFFORT TO LIFT LOAD N | HEADROOM MIN C | CHAIN DIA & NO. OF FALLS | LIFTING HEIGHT | TEST LOAD | MIN HEIGHT | MAX MOTIVE POWER | NO OF CHAINS | LIFTING CHAIN DIM | HEADROOM | EFFORT ON LEVER TO LIFT FULL | NO OF LOAD CHAIN FALLS | FALLS OF LOAD CHAIN | CHAIN DIM | CLOSED HEIGHT | MAX CAPACITY | CHAIN DIM D X P | LIFT WITH ONE FULL LEVER TURN | HANDLE PULL AT WLL | HEADROOM MIN | LOAD CHAIN DIA | SERIES | LOAD CHAIN SIZE D X P | SINGLE LINE CAPACITY | SINGLE LINE LIFT | SINGLE FALL CAPACITY | SINGLE FALL LIFTING SPEED | CARRYING CAPACITY | WIRE ROPE DIA (MM) | WIRE ROPE DIA (INCH) | DOUBLE LINE CAPACITY | DOUBLE FALL CAPACITY | DOUBLE FALL LIFTING SPEED | DOUBLE LINE LIFT | WINCH TYPE | PULLING CAPACITY | LIFTING CAPACITY | HAND FORCE REQUIRED | HANDLE LENGTH | FINISH | GEAR RATIO | HUB DIA | CABLE DIA | STAINLESS STEEL AVAIL | NOISELESS AVAIL | CASE | GRADE | CORE | LAY | MBF | NOMINAL LENGTH MASS | APPROX MASS | SPEED (M/MIN/ 50HZ) | MOTOR OUTPUT | POWER SUPPLY | AVERAGE SPEED (50 HZ) | WIRE ROPE DIA X LENGTH | MOTOR | OPERATING VOLTAGE | LIFT SPEED | MOTOR RATING OUTPUT | MOTOR RATING | HOOK SUSPENSION HEADROOM | HOOK SUSPENDED WEIGHT | LIFTING SPEED | CLASSIFICATION FEM/ISO | LIFTING SPEED FINE LINE | HOIST MOTOR | THREAD SIZE | LOAD DIR 1 LEG: 00 | LOAD DIR 1 LEG: 900 | LOAD DIR 2 LEG: 00 | LOAD DIR 2 LEG: 0-450 | LOAD DIR 2 LEG: 45-600 | LOAD DIR 2 LEG: 900 | LOAD DIR 2 LEG: UNSYMMETRICAL | 2/3/4 LEGS 120° (MAX INCL ANGLE) | 2/3/4 LEGS 60° (MAX INCL ANGLE) | 2/3/4 LEGS 90° (MAX INCL ANGLE) | TORQUE | LOAD DIR 3-4 LEG: 0-450 | LOAD DIR 3-4 LEG: 45-600 | LOAD DIR 3-4 LEG: UNSYMMETRICAL | PITCH | MBS | PVC / OUTSIDE DIA | WIRE DIA | WIRE ROPE DIM | UOM | DIN CODE | PRE DRILLED HOLE SIZE | NOMINAL DIA | FREE BREAKING | VOLUME OF CABLE | FERRULES TO EN 13411 (DIN 3093) ALLOY FERRULE | ALLOY FERRULE (DIE SIZE) | ESTIMATED PRESS NEEDED | NET GRIP LENGTH FITTED ON MEAN CABLE DIA | UTS | MIN CABLE DIA | MAX CABLE DIA | METALLIC AREA | MIN BREAKING FORCE 1770 2160 N/mm² | MIN BREAKING FORCE 1770 N/mm² (kN) | MIN BREAKING FORCE 1770 N/mm² (t) | MIN BREAKING FORCE 1960 N/mm² | MIN BREAKING FORCE 1960 N/mm² (kN) | MIN BREAKING FORCE 1960 N/mm² (t) | MIN BREAKING FORCE 2160 N/mm² | MIN BREAKING FORCE 2160 N/mm² (kN) | MIN BREAKING FORCE 2160 N/mm² (t) | MIN BREAKING FORCE EEIP/2160 | MIN BREAKING FORCE EIP/1960 (Kn) | MIN BREAKING FORCE EIP/1960 (t) | MIN BREAKING FORCE EIP/2160 (Kn) | MIN BREAKING FORCE EIP/2160 (t) | BUTTON DIA | BUTTON LENGTH | MAX TENSILE GRADE | BROOM LENGTH | MAX SPAN | END CAP WEIGHT - EACH | 60° MAX CAPACITY | 90° MAX CAPACITY | 120° MAX CAPACITY | LIFTING LUGS TOP (GRADE S SAFETY SHACKLE) | LIFTING LUGS LOWER (GRADE S SAFETY SHACKLE) | LOAD CENTRE | POCKET SIZE | POCKET CENTRES | DESIGN 4:1 (MOORING) MWL | DESIGN 5:1 (LIFTING) WLL | AGGREGATE TRAILER MASS MAX | LINKS/M | LINKS | MWL | OPENING | LOAD | LOAD CAPACITY | LASHING CAPACITY G70 CHAIN | LASHING CAPACITY G80 CHAIN | M/500KG DRUM | PRETENSION | END FITTING | EXTERNAL WIDTH | INTERNAL WIDTH | MAX NO OF PEOPLE | MAX RATED LOAD | LANYARD ENDS | HOOK TYPE | CARABINER | CARABINER ON DEVICE | CARABINER ON ROPE | RATING | APPLICATION | LID DEPTH | LID LENGTH | LID WIDTH | LOWER BOX DEPTH | LOWER BOX LENGTH | LOWER BOX WIDTH | UPPER MAST | LOWER MAST | BASE | TOTAL ARM REACH | WORKER RATING | ULTIMATE STRENGTH RATING | MAF RATING FOR SRL’S | EXTENDED REACH | MIN REACH | MAX REACH | MAX HEIGHT | RATCHET | TENSION FORCE INDICATOR | MESH | ENERGY ABSORPTION | ABSEILING HEIGHT | Max GVW ² Severely Bogged Vehicle³ | INSIDE CLEARANCE | HANDRAIL | KNEE RAIL | INCREMENTAL FROM PREVIOUS SIZE | POST | BOLT EFFECTIVE LENGTH | MAX COMPONENT WEIGHT | MIN COMPONENT WEIGHT | CODE | MIN BREAKING FORCE | INCREMENTAL INCREASE IN MBF | SUITABLE TRAILER / CARAVAN | ADD TO QUOTE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8mm | 0.3t | 0.06kg | 0.0625mm | 559310-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2mm | 0.5t | 0.14kg | 0.0833mm | 559313-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8mm | 0.9t | 0.3kg | 0.0909mm | 559316-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4mm | 1.4t | 0.5kg | 0.1mm | 559319-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8mm | 2t | 0.6kg | 0.125mm | 559322-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1mm | 2.8t | 1.1kg | 0.1429mm | 559325-W | Max: Min: 1 Step: 1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 1/4mm | 4.6t | 2.1kg | 0.1429mm | 559332-W | Max: Min: 1 Step: 1 |
Filters Sort results
Reset Apply
WLL | TYPE | SIZE | CHAIN SIZE | BROOM LENGTH | BUTTON LENGTH | BUTTON DIA | SIZE A | LIFTING CAPACITY | WINCH TYPE | DIN CODE | MODEL | A | A MIN | A MAX | A OPEN | A CLOSED | A/F | B | B1 | B2 | b1 MIN | b2 MAX | B MIN | B MAX | C | C1 | C2 | D | D1 | D2 | D3 | E | E1 | EL | E OPEN | E CLOSED | F | F MIN | F MAX | G | H | H1 | H + L | H MIN | I | J | K | L | LI | L1 | M | M° | M MAX | N | NW | N MAX | OT | O | Ø | Ø A | Ø D | P | R | 2R | S | T1 | T | T2 | U | V | W | W1 | W2 | WT | X | Y | A SINGLE LINE | INTERMEDIATE PIPE | A DOUBLE LINE | A: DIA BOW | A: DIA BODY | B: DIA PIN | C: DIA EYE | D: WIDTH EYE | E: WIDTH INSIDE | F: LENGTH INSIDE | G: WIDTH BOW | H: LENGTH | I: LENGTH BOLT | J: WIDTH | K: THICKNESS NUT | WEIGHT 2.5M SLING | WEIGHT 3M SLING | WEIGHT 3.5M SLING | WEIGHT 4M SLING | WEIGHT 4.5M SLING | WEIGHT 5M SLING | WEIGHT 5.5M SLING | WEIGHT 6M SLING | WEIGHT 6.5M SLING | WEIGHT 7M SLING | WEIGHT 7.5M SLING | WEIGHT 8M SLING | WEIGHT 8.5M SLING | WEIGHT 9M SLING | WEIGHT 9.5M SLING | WEIGHT 10M SLING |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.3t | 3/8mm | 10 | 9/16 | 27/32 | 11/32 | 35 | 21/32 | 32 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.5t | 1/2mm | 12 | 3/4 | 1 1/8 | 7/16 | 40 | 7/8 | 33 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0.9t | 5/8mm | 16 | 15/16 | 1 13/32 | 9/16 | 52 | 1 3/32 | 44 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1.4t | 3/4mm | 20 | 1 1/8 | 1 11/16 | 21/32 | 72 | 1 5/16 | 59 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2t | 7/8mm | 22 | 1 5/16 | 1 31/32 | 25/32 | 82 | 1 17/32 | 73 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2.8t | 1mm | 24 | 1 1/2 | 2 1/4 | 7/8 | 92 | 1 3/4 | 77 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4.6t | 1 1/4mm | 32 | 1 7/8 | 2 13/16 | 1 3/32 | 130 | 2 3/16 | 123 |
Description
• Made from carbon steel following steel specifications of BS 970 with zinc plated finish, manufactured with a smaller eye than DIN type
• Conforms to AS2317, marked with working load limit in tonne, nominal size, quality grade, batch numbered and supplier identification. Proof tested to 2 x Working load limit and Minimum breaking force of 6 x Work load limit
• Test Certificate are supplied upon request
